广东11选5走势图

丹东奥龙射线仪器集团有限公司
产品中心

联系我们

丹东奥龙射线仪器集团有限公司


地址:辽宁省丹东市振兴区爱河大街66号 
邮编:118009
电话:0415-6278999 

电话:0415-6278777  

电话:0415-3141333

电话:0415-3141222(售后服务)

电话:400-168-8858(销售热线)

传真:0415-3458588 3458688

网址:www.cysj0755.com


ALL-5800A型定角度X射线晶体定向仪

您的当前位置: 首 页 >> 产品分类 >> X射线晶体定向仪

ALL-5800A型定角度X射线晶体定向仪

详细介绍

ALL-5800A型定角度X射线晶体定向仪.jpg


产品特点

该仪器针对客户提供蓝宝石晶锭定角度进行测量定向粘结而研发设计的,解决了大尺寸晶体不能在普通定向仪上测量定向粘结的难题,保证了大尺寸晶体定向粘结的准确性。

该仪器上下升降系统及前后上料均由步进电机驱动,操作简单,先进的PLC程序稳定可靠,故障率低,可长时间连续无故障运行。设备的专用二维夹具调整范围为±4度,可有效满足200kg以内晶锭的粘接定向,操作者可以很容易调整出所测量定向的角度,特制对称锁紧装置可避免切割或掏棒引起的夹具松动。360度旋转复检一键完成方便准确,有效的减轻了操作者的工作强度,从而减少了单件定向的时间。

该仪器采用了高端传感器,可以自动限位,大大提高了晶体定向效率。



技术指标

输入电流:单相交流电压220V,50Hz,0。5KW  

X 射线管:铜靶、风冷、管电压30KV,管电流:0~5mA

计 数 器:盖革计数管

时间常数:1、2、3档

角度显示:以标准片或标准棒为准

角度调整:专用二维夹具

检测位置:以0.5mm塞尺为准

工作台前后运动:电动,自动限位

上下升降:电动

工作台旋转:电动

光    闸:电动

综合精度:±30″

外形尺寸:1025mm(长)X1230mm(宽)X1950mm(高)

仪器重量:620kg

Product Features

The instrument is designed for splice and orientating sapphire, which solves the problem that large sized crystal can not be orientated and spliced on ordinary orientation instrument, it guarantees the accuracy of the orientation and splice big size crystal.

The instrument up and down lifting system, backward- forward feeding system, and diffraction system are all driven by stepper motor, easy operating, and advanced PLC program is stable and reliable. The system is with low failure rate, it ensure the system could work a long time without failure.The special 2D clip’s adjustable range of the system is ±4°, it can effectively support the orientation and splice of the crystal ingot which less than 200kg, the operator can easily set the orientation angle, special symmetrical locking device can eliminate the clip’s loose problem cased by cutting and drawing out crystal bar. 360°rotating recheck finished by one key, it effectively reduced the operator’s work quota, cut down single crystal ingot orientation time and increase the work performance.


The instrument uses high-end sensor, which can automatically search reference point, greatly improved the orientation efficiency.


Technical Parameters

Input current: Single phase AC 220V/ 50HZ, 0.5kW

X ray tube: Sopper target, air cool, tube voltage 30kV, tube current: 0~5mA

Counter: Geiger counter 

Time constant: 1, 2, 3 gear

Angle display: Subject to standard chip or standard bar

Angle adjustment: Special 2D clip

Testing position: Subject to 0.5mm feeler gauge

Before and forth movement of work platform: Motor and position limiting 

Lift up and down: Electric

Work platform rotation: Electric

Optical shutter: Electric

Comprehensive accuracy: ±30”

Outer dimension: 1025mm(L)X 1230mm(W)X 1950mm(H)

Weight: 620kg


相关标签:

最近浏览:

相关产品:

相关新闻:

在线客服
分享
广东快乐十分 广东11选5分布走势图 博客来棋牌 广东快乐十分官网 博客来棋牌 广东11选5走势图 广东快乐十分 广东快乐十分官网 广东11选5分布走势图 广东快乐十分