广东11选5走势图

丹东奥龙射线仪器集团有限公司
产品中心

联系我们

丹东奥龙射线仪器集团有限公司


地址:辽宁省丹东市振兴区爱河大街66号 
邮编:118009
电话:0415-6278999 

电话:0415-6278777  

电话:0415-3141333

电话:0415-3141222(售后服务)

电话:400-168-8858(销售热线)

传真:0415-3458588 3458688

网址:www.cysj0755.com


ALL-5800B型多角度X射线晶体定向仪

您的当前位置: 首 页 >> 产品分类 >> X射线晶体定向仪

ALL-5800B型多角度X射线晶体定向仪

详细介绍

ALL-5800B型多角度X射线晶体定向仪


产品特点

该仪器针对蓝宝石晶锭需对A、C、R、M向等多角度进行测量定向粘结而研发设计的,而且对硅单晶,砷化镓等晶体角度均可测量定向粘结,不但解决了大尺寸晶体不能一机测量定向多角度的难题,而且综合精度为±30″,确保晶体测量,定向粘结的准确性。是国内目前最先进的机电光一体化的新产品。

该仪器上下升降系统,前后上料系统及衍射测量系统均由步进电机驱动,操作简单,先进的PLC程序稳定可靠,故障率低可长时间连续无故障运行,多点传感器限位装置增加了稳定性。设备的专用二维夹具调整范围为±4度,可有效满足300kg以内晶锭的粘接定向,操作者可以很容易调整出所测量定向的角度,特制对称锁紧装置可避免切割或掏棒引起的夹具松动。360度旋转复检一键完成方便准确,有效的减轻了操作者的工作强度,从而减少了单件晶锭定向的时间,提高了生产率。

采用高精度欧姆龙编码器记录衍射角度,并通过触摸屏显示,同时也实时显示回转工作台的旋转角度。对多个角度可自动定向,减少人为误差,提高检测效率。

技术指标

输入电流:单相交流电压220V,50Hz,1KW 

X 射线管:铜靶、风冷、管电压30KV,管电流:0~5mA

计 数 器:盖革计数管

时间常数:1、2、3档

角度调整:专用二维夹具

检测位置:数显表显示0位

工作台前后运动:电动,自动限位

上下升降:  电动

工作台旋转:电动

光    闸:  电动

综合精度为:±30″

外形尺寸:1390(长)×1215(宽)×2126(高)mm

仪器重量:570kg

Product Features

The instrument is specially designed for multi-angle orientation and splice of sapphire ingot’s on A,C,R,M surface, and also suits silicon single crystal and gallium arsenide multi-angle orientation and splice, the system not only solve the big size crystal multi-angle orientation in one system problem, but also  ensure the crystal orientation and splice because of Its ±30” comprehensive accuracy。 At present it is the most advanced new mechanical and optical integration equipment in China。

The instrument up and down lifting system, backward-forward feeding system, and diffraction system are all driven by stepper motor, easy operating, and advanced PLC program is stable and reliable. The system is with low failure rate, it ensure the system could work a long time without failure. Multi-point sensor limiter increased the system’s stability. The special 2D clip’s adjustable range of the system is ±4°, it can effectively support the orientation and splice of the crystal ingot which less than 300kg, the operator can easily set the orientation angle, special symmetrical locking device can eliminate the clip’s loose problem cased by cutting and drawing out crystal bar. 360°rotating recheck finished by one key, it effectively reduced the operator’s work quota, reduce single crystal ingot orientation time and increase the work performance.

The high precision OMRON encoder is used to record the diffraction angle and display through the touch screen, and the rotation angle of the rotary table is displayed at the same time. It can automatically orientate multiple angles, reduce human error and improve the detection efficiency.


Main Parameters

Input current: Single phase AC 220V, 50Hz, 1kW

X-ray tube: Copper target,air cooling, tube voltage 30kV, tube current 0~5mA

Counter: Geiger counter 

Time constant: 1, 2, 3 gears.

Angel adjustment: Special 2D clip。

Testing position: Digital display meter display in 0 position

Before and forth movement of work platform: Motor and position limiting 

Lift up and down: Electric

Work platform rotation: Electric

Shutter: Electric

Comprehensive accuracy: ±30”

Outside dimension: 1390mm(L) × 1215mm(W) × 2126mm(H)

Weight: 570kg


相关标签:

上一篇:没有了
下一篇:ALL-5800A型定角度X射线晶体定向仪

最近浏览:

相关产品:

相关新闻:

在线客服
分享
广东快乐十分 广东11选5开奖结果 博客来棋牌 广东11选5分布走势图 广东11选5 广东快乐十分官网 广东快乐十分 广东11选5 博客来棋牌 178彩票